Author: Dziuba, F.D.
Paper Title Page
TH1C4 Cavity Designs for the CH3 to CH11 and Bellow Tuner Investigation of the Superconducting Heavy Ion Accelerator HELIAC 140
 
  • T. Conrad, H. Podlech, M. Schwarz
    IAP, Frankfurt am Main, Germany
  • K. Aulenbacher, W.A. Barth, F.D. Dziuba, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu
    HIM, Mainz, Germany
  • K. Aulenbacher
    IKP, Mainz, Germany
  • W.A. Barth, M. Basten, F.D. Dziuba, V. Gettmann, M. Heilmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu, A. Rubin, A. Schnase, S. Yaramyshev
    GSI, Darmstadt, Germany
 
  New CH-DTL cavities designs of the planned Helmholtz Linear Accelerator (HELIAC) are developed in collaboration of GSI, HIM and IAP Frankfurt. The in cw-mode operating linac with a final energy of 7.3 MeV/u, is intended for various experiments, in particular with heavy ions at energies close to the Coulomb barrier for research on SHE. Twelve sc CH cavities are foreseen, divided into four different cryostats each equipped with two dynamic bellow tuner. After successful beam tests with CH0, CH3 to CH11 were designed. Based on the experience gained so far, optimizations were made, which will lead to both an increase in performance in terms of reducing the peak fields limiting superconductivity and a reduction in manufacturing costs and time. In order to optimize manufacturing, attention was paid to design many parts of the cavity, such as lids, spokes, tuner and helium shell, with the same geometrical dimensions. In addition, a tuner test rig was developed, which will be used to investigate the mechanical properties of the bellow tuner. For this purpose, different simulations were made in order to realize conditions as close as possible to reality in the test rig.  
slides icon Slides TH1C4 [6.439 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-HIAT2022-TH1C4  
About • Received ※ 27 June 2022 — Revised ※ 19 July 2022 — Accepted ※ 10 August 2022 — Issue date ※ 19 September 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TH3C2 Alternating Phase Focusing Based IH DTL for Heavy Ion Application 162
 
  • S. Lauber, K. Aulenbacher, W.A. Barth, M. Basten, C. Burandt, F.D. Dziuba, P. Forck, V. Gettmann, T. Kürzeder, J. List, M. Miski-Oglu, A. Rubin, S. Yaramyshev
    GSI, Darmstadt, Germany
  • K. Aulenbacher, W.A. Barth, M. Basten, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu, S. Yaramyshev
    HIM, Mainz, Germany
  • K. Aulenbacher, W.A. Barth, F.D. Dziuba, S. Lauber, J. List
    KPH, Mainz, Germany
  • M. Droba, H. Podlech, M. Schwarz
    IAP, Frankfurt am Main, Germany
  • H. Podlech
    HFHF, Frankfurt am Main, Germany
 
  The continuous wave (CW) operated HElmholtz LInear ACcelerator (HELIAC) is going to reach the next milestone with the commissioning of the superconducting (SC) Advanced Demonstrator cryomodule, comprising four SC Crossbar H-mode (CH) cavities and SC steerer magnets. In parallel with the commissioning of the SC main accelerator, the normal conducting injector consisting of an ECR ion source, a RFQ and two Interdigital H-mode (IH) cavities will be built based on an Alternating Phase Focusing (APF) beam dynamics scheme. Both IH cavities will provide a beam energy gain from 300 keV/u to 1400 keV/u with a maximum mass to charge ratio of 6, requiring only one external quadrupole triplet and beam steerer elements between them. The APF concept allows stable and effective beam transport with transverse and longitudinal focusing, enabling an efficient and compact design. Due to the stringent requirements of the APF concept on the voltage distribution and the CW operation, optimization of each cavity in terms of RF, mechanical and thermal properties is crucial for successful operation of the HELIAC injector. The current layout of the APF based and CW operated injector will be presented.  
slides icon Slides TH3C2 [1.603 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-HIAT2022-TH3C2  
About • Received ※ 21 June 2022 — Revised ※ 04 July 2022 — Accepted ※ 10 August 2022 — Issue date ※ 19 September 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)