Paper |
Title |
Page |
TH1C4 |
Cavity Designs for the CH3 to CH11 and Bellow Tuner Investigation of the Superconducting Heavy Ion Accelerator HELIAC |
140 |
|
- T. Conrad, H. Podlech, M. Schwarz
IAP, Frankfurt am Main, Germany
- K. Aulenbacher, W.A. Barth, F.D. Dziuba, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu
HIM, Mainz, Germany
- K. Aulenbacher
IKP, Mainz, Germany
- W.A. Barth, M. Basten, F.D. Dziuba, V. Gettmann, M. Heilmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu, A. Rubin, A. Schnase, S. Yaramyshev
GSI, Darmstadt, Germany
|
|
|
New CH-DTL cavities designs of the planned Helmholtz Linear Accelerator (HELIAC) are developed in collaboration of GSI, HIM and IAP Frankfurt. The in cw-mode operating linac with a final energy of 7.3 MeV/u, is intended for various experiments, in particular with heavy ions at energies close to the Coulomb barrier for research on SHE. Twelve sc CH cavities are foreseen, divided into four different cryostats each equipped with two dynamic bellow tuner. After successful beam tests with CH0, CH3 to CH11 were designed. Based on the experience gained so far, optimizations were made, which will lead to both an increase in performance in terms of reducing the peak fields limiting superconductivity and a reduction in manufacturing costs and time. In order to optimize manufacturing, attention was paid to design many parts of the cavity, such as lids, spokes, tuner and helium shell, with the same geometrical dimensions. In addition, a tuner test rig was developed, which will be used to investigate the mechanical properties of the bellow tuner. For this purpose, different simulations were made in order to realize conditions as close as possible to reality in the test rig.
|
|
|
Slides TH1C4 [6.439 MB]
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-HIAT2022-TH1C4
|
|
About • |
Received ※ 27 June 2022 — Revised ※ 19 July 2022 — Accepted ※ 10 August 2022 — Issue date ※ 19 September 2022 |
Cite • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
TH3C2 |
Alternating Phase Focusing Based IH DTL for Heavy Ion Application |
162 |
|
- S. Lauber, K. Aulenbacher, W.A. Barth, M. Basten, C. Burandt, F.D. Dziuba, P. Forck, V. Gettmann, T. Kürzeder, J. List, M. Miski-Oglu, A. Rubin, S. Yaramyshev
GSI, Darmstadt, Germany
- K. Aulenbacher, W.A. Barth, M. Basten, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu, S. Yaramyshev
HIM, Mainz, Germany
- K. Aulenbacher, W.A. Barth, F.D. Dziuba, S. Lauber, J. List
KPH, Mainz, Germany
- M. Droba, H. Podlech, M. Schwarz
IAP, Frankfurt am Main, Germany
- H. Podlech
HFHF, Frankfurt am Main, Germany
|
|
|
The continuous wave (CW) operated HElmholtz LInear ACcelerator (HELIAC) is going to reach the next milestone with the commissioning of the superconducting (SC) Advanced Demonstrator cryomodule, comprising four SC Crossbar H-mode (CH) cavities and SC steerer magnets. In parallel with the commissioning of the SC main accelerator, the normal conducting injector consisting of an ECR ion source, a RFQ and two Interdigital H-mode (IH) cavities will be built based on an Alternating Phase Focusing (APF) beam dynamics scheme. Both IH cavities will provide a beam energy gain from 300 keV/u to 1400 keV/u with a maximum mass to charge ratio of 6, requiring only one external quadrupole triplet and beam steerer elements between them. The APF concept allows stable and effective beam transport with transverse and longitudinal focusing, enabling an efficient and compact design. Due to the stringent requirements of the APF concept on the voltage distribution and the CW operation, optimization of each cavity in terms of RF, mechanical and thermal properties is crucial for successful operation of the HELIAC injector. The current layout of the APF based and CW operated injector will be presented.
|
|
|
Slides TH3C2 [1.603 MB]
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-HIAT2022-TH3C2
|
|
About • |
Received ※ 21 June 2022 — Revised ※ 04 July 2022 — Accepted ※ 10 August 2022 — Issue date ※ 19 September 2022 |
Cite • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|